Maretron RAA100 Guia de Instalação descarregar pdf (Página 36)

www.maretron.com 1-866-550-9100

Maretron’s RAA100 is used to adapt

commercially available resistive rudder

senders to the NMEA 2000

network.

This allows you to observe rudder angle

anywhere on the vessel where there are

NMEA 2000

compatible displays such

as the Maretron DSM250.

The RAA100 is compatible with both

the American standard (240-30 ohms)

and European standard (10-180 ohm)

resistive senders. In fact, the RAA100

can be calibrated for any resistance

between 0 and 300 ohms.

You can also use the RAA100 with

analog gauges at the same time as NMEA

2000

so you don’t have to give up existing

analog gauges to enjoy the advantages of

digitally networked information.

The Maretron RAA100 has the following features:

• NMEA 2000

Interface

• Adapts American standard (240-30 ohm)

resistive senders to NMEA 2000

Network

• Adapts European standard (10-180 ohm)

resistive senders to NMEA 2000

Network

• Can be Calibrated for any Resistive Sender

Ranging from 0-300 Ohms or 300-0 Ohms

• Three Point Electronic Calibration

eliminates need for Mechanical Adjustment

or Calibration

• Can be Used Standalone Without Analog Gauges

RAA100

Rudder Angle

Adapter

Products

PART NUMBER DESCRIPTION

RAA100-01 Rudder Angle Adapter

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 81 82

Sem comentários

Maretron RAA100 Guia de Instalação Página 36